Dhcp Ip Assignment - FlexWATCH FW-3850 Manual De Usuario

FlexWATCH User Manual Part 2
Menu
Server Name
Network
IP Address
Netmask
Root password
In case of selecting 2 or more servers from the list
TIP) Please refer to 2.3.2.1 Manual IP Assignment

2.3.3. DHCP IP Assignment

When your local network is managed by DHCP server, cable modem, or VDSL, DHCP IP
Assignment is used. xDSL with auto-dial up also needs DHCP IP Assignment.
1.
Connect your PC and FlexWATCH server in the network. Setup a static IP address
according to the steps in chapter '2.3.2. Static IP Assignment'
2.
After IP setup, check out if you can access to the homepage of FlexWATCH server by
clicking "Connect" icon.
TIP) Please enable AOIP option in Admin menu if you want to have FlexWATCH server to be
accessible by remote users.
3.
Run FlexWATCH Installer again, and select FlexWATCH on the search list, Click IP
Setup button and specify DHCP option.
In case of selecting 1 server
M4028
Assign a name to selected FlexWATCH
Setting for the general Network Information
Automatic assigned IP will be shown. You may use or change it.
Notice) In case of IP conflict, you shall assign proper IP to
FlexWATCH server.
Automatic assigned Netmask will be shown. You may use or
change it.
Netmask is for dividing IP classes. Please ask the network
administrator for more info.
Password for FlexWATCH server to authenticate a valid user. The
default password for FlexWATCH is root.
17
Description
Seyeon Tech Co., Ltd