System Login And Network Configuration By Hyper Terminal; Figure 24 Com Port Settings - FlexWATCH FW-3850 Manual De Usuario

FlexWATCH User Manual Part 2

2.4.2. System Login and Network Configuration by Hyper Terminal

1.
After setting Hyper Terminal, press Enter key several times and then you can see
messages below. Enter Login ID and Password. (Factory defaults for Admin ID and
Password is root/root.)
2.
If you correctly enter ID and Password, 'bash#' prompt will show up as below.
FlexWATCH login:
Password: root
-----------------------------------------------------------
SYSTEM
VERSION
MODEL
-----------------------------------------------------------
login[504]: root login on `ttyS0'
bash#
M4028

Figure 24 COM Port Settings

Serial Port Settings
Bits per Second
Data bits
Parity
Stop bits
Flow control
Seyeon Tech Co., Ltd. 2001-2003
Linux Kernel 2.4.21-syl1
FlexWATCH login:
root
: FlexWATCH
: 3.0.070327-mpeg
: FW-5450-S
Value
115200
8
None
1
None
23 Seyeon Tech Co., Ltd