Installation - Defiant DF-5936-BK Guía De Uso Y Cuidado

Installation

Determining the mounting
1
location
NOTE: The light fixture should be mounted approximately
8 ft. (2.4 m) above the ground.
Determine the mounting location – wall mount
only.
Position the lamp heads (A) in the general
direction of the desired light coverage.
2
Removing the mounting plate
NOTE: This fixture comes with a mounting plate (D). It is
pre-assembled on the light fixture (B) for shipping.
Unscrew the two decorative screws (CC)
connecting the light fixture (B) to the mounting
plate (D) and remove the mounting plate (D)
using the pull loop.
B
CC
Wall Mount
A
3
Installing the mounting bracket
Remove the existing light fixture.
Install the mounting bracket (FF) using the
mounting bracket screws (AA or BB) that best
D
fit the junction box.
Firmly pull on the mounting bracket to verify
it is securely mounted to the junction box. If
necessary, use the screws that were removed
from the existing light fixture.
5
Please contact 1-866-308-3976 for further assistance.
C
WARNING: Turn the power off at the circuit breaker or
fuse. Place tape over the circuit breaker switch and verify
power is off at the light fixture.
NOTE: Four mounting bracket screws of various sizes are
included. The installation will only require two. Discard the
unused mounting bracket screws after installation.
FF
AA or BB
HOMEDEPOT.COM