Technical Specifications; Ce Declaration Of Conformity - Beta 1850B Instrucciones De Uso

Thank you
for deciding to choose a BETA hot
air gun. This tool can be used for
completing a wide range of jobs
safely and reliably, such as solder-
ing, welding PVC, shaping, drying,

Technical specifications

Mains voltage
Output
Stage
Air flow
Temperature
Temperature setting
Temperature display
Enclosure
(without earth terminal)
CE
Declaration of Conformity
This product conforms to Low-voltage Directive 73/23/EEC and EMC Directive 89/336/EEC.
Features - Getting started
Please note: The distance from the object you are working on depends on material and intended method
of working. Always try out the air flow and temperature on a test piece first! Using the attachable accessory
nozzles (see accessories page on the cover) the flow of hot air can be controlled with maximum precision.
Take care when changing hot nozzles! When using the hot air gun in the self-resting position, make sure
it is standing on a stable, non-slip and clean surface.
1850B
The tool is switched on and off at the two-stage switch (5) on the back of the grip handle. Air flow and tem-
perature can be adjusted to 2 settings. Stage 1 reaches 300 °C at an air flow of 240 l/min, stage 2 reaches
500 °C at 450 l/min.
shrink-fitting, stripping paint etc. All
BETA tools are manufactured to
the highest standards and under-
go a strict process of quality con-
trol.
- 6 -
Used in the proper manner this
hot air gun will give you lasting
satisfaction.
1850B
230 – 240 V, 50 Hz
1600 W
1 2
240 450 l/min
300 500 °C
–
–
II