Publicidad
Pair the Motion Sensor with KODAK Security
1. Launch the KODAK Security App.
2. Under Camera Advanced Setting, tap «Base Settings».
3. Choose «Sensor Set up», press «+» and select the device.
4.a Auto Pairing Method :
After pressing «pair» button on
the application, remove the
insulating plastic tab to send
out the pairing signal orremove
and reinstall the battery.
4.b Manual Pairing Method :
After pressing «pair» button on
the application, press the
'Pairing' button located inside
the battery compartment.
EN
Publicidad
