Whirlpool UDT555SAHP Instrucciones Para El Usuario página 15

Removable Top Rack
The removable top rack allows you to wash larger items, such as
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from
dishwasher.
To remove the rack:
1. To gain access to the track stops, pull the upper rack forward
about halfway out of the tub.
2. Press on the edge of the ridged area on the track stop while
tipping the track stop toward the center of the dishwasher.
This action releases a small retaining tab that locks the track
stop to the track (see Track stop – left).
NOTE: It is helpful to use 2 hands. Take special note of the
orientation of the track stops.
Track stop – left
3. With the retaining tab released, pull the track stop straight
toward the opposite track to remove it.
4. After removing both track stops, gently pull the top rack out of
the tracks by rolling it toward you.
5. Replace the track stops by coming up from under the track
and slipping the lower tab of the track stop into the lower slot
of the track (see Track stop – right) and rotate the track stop
into place. Then press on the edge of the ridged area while
pushing the track stop straight toward the track. This action
locks the retaining tab back into place.
Track stop – right
6. Test the track stop by pulling it toward the opposite track to
ensure that it is locked in place.
To replace the rack:
1. Gently pull the tracks forward in dishwasher until they stop.
Remove track stops. See steps 1 through 3 above.
2. Place the back wheels on each side of the rack into the track
and roll the rack into the tracks, but do not push the rack all
the way into the tub.
3. Insert front rack wheels on each side of the rack into the
track.
4. Slide the rack into the dishwasher.
5. Replace the track stops. See steps 5 and 6 above.
IMPORTANT: Be sure that the track stops are locked in place
and cannot be easily removed. They keep the rack from
coming out of the track.
15