Balluff BML-S1G0-7-M5EG-0 Serie Instrucciones Breves página 10

BML-S1G0-_7_ _-M5EG-_0-_ _
Absolute Magnetically Coded Position Measuring System
Construction and function (continued)
Pin Wire
color
1)
Absolute signals
BML-S1G0-B/S/M7_ _-...
...B...
BiSS C
1 WH
2 BN
+Clk
3 GN
–Clk
4 YE
–Data
5 GY
+Data
6 PK
7 BU
8 RD
9 BK
10 VT
11 GY PK
12 RD BU
TR Shield
Wire colors for BML-S1G...KA_ _ or for connector
1)
Unassigned leads must not be connected.
2)
The meaning of the signals (sin, cos, A, B) varies with the controller manufacturer. Please compare the controller documentation and wire accordingly.
3)
Signal is given a * by some controllers.
4)
3 english
Signals
Incremental real-time
BML-S1G0-_7_ _
...S... ...M...
SSI Mitsubishi
Not used
2)
Not used
2)
+TxD/RxD
–TxD/RxD
Not used
2)
Not used
2)
GND
V DC
Not used
2)
Not used
2)
Preset
Must remain free
Shield
Description
signal
-M5EG-_...
...G-...
Analog
Digital rectangular signal
+B (+cos) Sinusoidal analog signal
Digital square-wave signal (inverted)
−B (−cos) Sinusoidal analog signal (inverted)
Clock signal (RS422)
Not used
2)
+TxD/RxD serial data
Clock signal (RS422) (inverted)
Not used
2)
–TxD/RxD serial data (inverted)
Data signal (RS422) (inverted)
Not used
2)
Data signal (RS422)
Not used
2)
Sensor ground (0 V)
Operating voltage +5 V DC, 10...28 V DC
−A (−sin) Sinusoidal analog signal (inverted)
+A (+sin) Sinusoidal analog signal
Define the current position as approx. 10 mm
–
(Connector housing to) shield
3)
4)
3), 4)
4)
4)
3), 4)
3)