Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
INTRODUCTION
RECHARGE THE BATTERY
CENTRAL BRUSH ADJUSTMENT
AND TROUBLESHOOTING
This manual will help you get the most from your
Advance SR 1005B. Read it thoroughly before
operating the machine. Specifications and details
are subject to change without prior notice.
SPARE PARTS AND MAINTENANCE
Repairs, when required, should be performed by
Advance service personnel using Advance original
replacement parts and accessories. Any "left,, or
"right,, indication are always defined with
reference to the machine forward movement
direction.
Call Advance for repairs parts or service. Please
specify the Model and the Serial Number when
discussing your machine.
MODIFICATION AND IMPROVEMENTS
Our company constantly improves its products and
reserves the right to make changes and
improvements at its discretion without being
obligated to apply such benefits to the machines
that were previously sold.
NAME PLATE
The Model and the Serial Number of your machine
are shown on the Nameplate located on the
steering column. This information is needed when
ordering repair parts for the machine. Use the
space below to note the Model and the Serial
Number of your machine for future reference.
MODEL _________________________________________
SERIAL NUMBER ________________________________
GENERAL SAFETY RULES
Carefully follow the rules described below to avoid
injury to the operator and damage to the machine.
PAG. 1
-Carefully read the labels on the machine, do not
cover them for any reason and replace them
immediately if they become worn or damaged.
-The machine storage temperature should range
between +32˚F and +104˚F.
-The machine working temperature range is from
PAG. 2
+32˚F to +104˚F.
PAG. 2
-Humidity should range between 30% and 95%.
PAG. 2-3
-Do not use the machine in an explosive
atmosphere
-Do not use the machine as a transport vehicle.
-Do not allow the brushes to operate while the
machine is stationary to avoid damaging the floor.
PAG. 4-5
-In case of fire, use a powder extinguisher.
-Do not bump into shelves or scaffolding where
there is a risk of falling objects.
-Adjust the operating speed to the floor conditions.
PAG. 5
-Do not exceed the declared slope limits to avoid an
PAG. 6
unstable condition.
PAG. 7
-When the machine is parked, remove the key and
PAG. 7
engage the parking brake.
-When machine-operating malfunctions occur,
PAG. 8
make sure that they are not caused by a lack of
routine maintenance. If not, request assistance
from the service center.
-If parts must be replaced, request ORIGINAL spare
parts from a dealer or Authorized Retailer.
-Before any maintenance operations, disconnect
the electric power supply from the batteries.
-Do not remove guards which require the use of
tools to be disassembled.
-Do not wash the machine with pressurized water,
or with corrosive substances.
-A service center should inspect the machine every
200 hours of operation.
-The machine must be disposed of properly,
because of the presence of toxic-harmful materials
(battery acid, oil, etc.) which are subject to
standards that require disposal in special centers.
-The machine will not generate damaging
vibration.
SAFETY- ACCIDENT PREVENTION
No accident prevention program is effective
without the complete cooperation of the person
directly responsible for operating the machine.
Most of the accidents that may occur in a company,
on the job or during transfers are caused by not
observing fundamental safety rules. A careful and
cautious user is the best guarantee against
accidents and is more effective than any type of
prevention program. While using the machine pay
attention to your surroundings and people nearby,
especially to children.
1
SAVE THESE INSTRUCTIONS!
56041505(2)2001-01
Publicidad
Capítulos
Tabla de contenido
