Comfort Mode - Orbegozo CM 8000 Manual De Instrucciones

CM 8000
Step 9: replace the device on the wall and use the remaining screw to secure the lower support to the wall
Note: there will be a slight gap between the wall and the device, it is normal and necessary for good air
ventilation. Do not remove the plug or cable this would invalidate the warranty.
Caution: Before making holes in the wall, verify that there are no electrical wires or pipes inside the wall, it
could cause great damage and injury.
Warning: Do not use the appliance if the glass panel is damaged.
USE OF THE FIREPLACE
The fireplace can be used with the remote control or with the touch panel on the front.
Step 1: plug the chimney into the mains.
Step 2: connect the chimney with the ON / OFF switch located on the right side of the appliance.
Step 3: Press the power button on the remote control or on the control panel, a beep will sound indicating
that the appliance has been turned on.
Step 4: To turn on the fire effect, press the LED light button on the remote control or control panel. The fire
will ignite. You can choose 5 types of flame by pressing the button repeatedly.
Step 5: activate the heating function by pressing the HEAT button on the remote control or the mode
button on the control panel. Select the desired temperature by pressing the + or - buttons on the control
panel.
Step 6: Activate the standby mode by pressing the power button on the remote or on the control panel. To
completely turn off the appliance press the ON / OFF switch.
Note: the heat function will turn off automatically when the room temperature reaches the selected
temperature in the device. It will reactivate when the room temperature drops.
FUNCTIONS
There are 7 different functions on the device, press the mode button repeatedly to change the function.

COMFORT MODE

Step 1: press the mode button once for comfort mode.
Step 2: Press the + or - buttons on the control panel to set the desired temperature, it can be from 10 to
35ºC.
Note: In this function the device will turn off automatically when the room temperature reaches the
selected temperature.
18