Lock Function - Orbegozo CM 8000 Manual De Instrucciones

CM 8000
Step 3: the minutes will flash. Press + or - to select the correct minutes. Press the set button to confirm.
Step 4: the current day will flash. Press + or - to select the correct one. Press the set button to confirm.
Note: when the appliance is unplugged, the schedule will be reset to the original setting.
OPEN WINDOW MODE
Press the Open window button on the touch control panel to activate the open window function, press it
again to deactivate the function.
In this function, if the device detects that the room temperature drops 2ºC in 2 minutes, it will automatically
turn off to save energy.

LOCK FUNCTION

The device will lock automatically if there is no manipulation for 1 minute. When this happens press the
adjustment button and the LED light at the same time for 3 seconds to unlock.
RESTORE FACTORY SETTINGS.
Press and hold the LED light button and the power button for 5 seconds to restore from the factory.
CHANGING THE BATTERY IN THE COMMAND
The remote control needs a CR205L battery (included), if it runs out:
1. The battery compartment is located at the rear of the remote.
2. To remove the battery, slide the compartment down and it will come out with the battery.
3. Remove the battery from the holder and insert a new one, checking that the polarity position is correct.
4. Return the bracket to its position on the remote.
20