Product Specifications; Delivery Form; Technical Data - Ivoclar Vivadent UTS 3D Instrucciones De Uso

9. Product Specifications

9.1

Delivery form

– 1 Universal transferbow with set screws
– 1 3D-registration joint with tommy screws
– 1 3D-Bite fork
– 1 Nosepiece
– 5 Nosepads, green (medium)
– 5 Nosepads, blue (soft)
– 2 Earpieces, white
– 2 Earpieces, black (large)
– 1 Reference indicator
– 2 Axis pins
– 1 Instructions for Use
The delivery form may vary from country to
country.
Recommended accessories
– UTS type 2 support pins for direct model transfer to
the articulator
Additional accessories and spare parts
– 3D-Bite fork (8.0)
– 3D-Registration joint (7.0)
– Nosepads 'medium' (10.1)
– Nosepads 'soft' (10.2)
– Earpieces (6.3)
– Earpieces 'L' (9.0)
9.2

Technical data

Weights:
Nosepiece:
3D-Registration joint:
UTS 3D-transferbow:
Materials:
Metal parts:
Side arms:
Earpieces:
Adjustment possibilities
Adjustable width with
earpieces 'L':
Adjustable width:
Adjustable nosepiece height:
Adjustable nosepiece length:
Adjustable earpiece height:
Adjustable reference indicator height:
25 g
94 g
160 g
aluminium, steel
carbon composite material
DELRIN resin
107 mm to 180 mm
87 mm to 160 mm
85 mm
22 mm
22 mm
66 mm
10. Miscellaneous
Tips for model transfer to the Stratos articulator
Please observe the Operating Instructions of the
Stratos articulator or the corresponding literature.
This device has been developed solely for use in dentistry. Start-up
and operating should be carried out strictly according to the
Instructions for Use. Liability cannot be accepted for damages
resulting from misuse or failure to observe the Instructions. The
user is solely responsible for testing the apparatus for its suitability
for any purpose not explicitly stated in the Instructions. Descriptions
and data constitute no warranty of attributes and are not binding.
17