Introduction / Signs And Symbols; Safety First; Health And Safety Instructions - Ivoclar Vivadent UTS 3D Instrucciones De Uso

1. Introduction / Signs and Symbols

1.1 Preface
Dear Customer,
Thank you for having purchased the UTS 3D transferbow.
This instrument is a highly technical product that is
distinguished for its excellent quality and high precision.
This transferbow has been designed according to the
latest industry standards. Inappropriate use may result in
certain risks. Please observe the corresponding notes and
become familiar with the Instructions for Use.
We wish you much success with the UTS 3D transferbow.
1.2 Introduction
The signs and symbols in these Instructions for Use
facilitate the finding of important points and have
the following meanings:
Risks and dangers
Important information
Contraindication
1.3 Notes regarding the Instructions for Use
Device concerned: UTS 3D System
Target group: Dentists, dental technologists
These Instructions for Use facilitate the correct, safe, and
economic use of the UTS 3D.
Should you lose these Instructions for Use, extra copies
can be ordered at a nominal fee from your local Ivoclar
Vivadent Service Center.

2. Safety First

2.1 Stipulated use
This chapter is especially important for personnel who
work with the UTS 3D or who have to carry out
maintenance or repair work.
Risks and dangers:
Risk and dangers:
2.2

Health and safety instructions

The UTS 3D must exclusively be used for the indications
listed in Chapter 3. Further instructions to ensure proper
use of the transferbow:
– The instructions, regulations, and notes in these
Instructions for Use must be observed.
– The UTS 3D must be properly maintained
(see Chapter 7).
When manipulating the
transferbow on the
patient, make sure than
the reference indicator
cannot injure the
patient's eyes.
Do not apply too much
pressure when
positioning the ear-
pieces. This may result in
injury to the auditory
meatus.
7