Lcd Backlight; Battery Replacement - TFA 60.2023.02 Instrucciones De Uso

TFA_No. 60.2023_Anleitung 07.08.2018 8:35 Uhr
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
• When the set alarm time is reached, the alarm clock will wake you up with the selected settings.
• If the alarm is not stopped manually, the increasing alarm tone automatically turns off after five minutes and will be reactivated at the same set
time in the following day. The alarm symbol remains on the display .
• Press any button to turn off the alarm sound or press the SNOOZE/LIGHT sensor button to activate the snooze function.
• SNOOZE appears and the alarm will be interrupted for the set time.
• The time display counts down the seconds.
• Press any button to turn off the snooze function.
7.2.3 Activate/deactivate alarm
• Press the LIGHT ALARM button or the ALARM button in the respective alarm mode, to activate or deactivate the alarm function. The respective
symbol will appear or disappear on the display.
7.3 Nature sounds
7.3.1 Play mode
• Press the SOUND button in normal mode to enter the play mode.
• RIVER (default) or the last set sound is heard.
• Press the SELECT button to select the sound. 5 different sounds are available (RIVER, W-NOISE, THUNDER, BACKWOODS, OCEAN)
• Press + or – button to adjust the respective volume (10 levels).
• The setting is saved.
• Press the SOUND button again to exit the play mode.
7.3.2 Sleep mode
• This mode allows a gentle fall asleep with calming nature sounds.
• Press the SOUND button in normal mode to enter the play mode.
• RIVER (default) or the last set sound is heard.
• You can now select the sound and adjust the volume (as described above).
• Press the TIMER button.
• 15 minutes (default) or the last sleep time flashes.
• Press the TIMER button to set the desired time duration - 15 minutes at a time (15 to 90 minutes).
• The time display counts down the seconds.
• In TIMER mode, you can press the TIMER button at any time to adjust the sleep time or turn off the timer.
• Press the SOUND button again to exit the play mode.
• After time has expired, the sound will switch off automatically.
7.3.3 NAP timer
• Press and hold the NAP button in normal mode for three seconds, to enter the setting mode.
• NAP and 10 minutes (default) or the last nap time flashes.
• Press the + or – button to set the desired time duration – it adds 5 minutes at a time (5 to 120 minutes).
• Confirm the setting with the NAP button.
16
Seite 9
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
• Once the setting is confirmed, the NAP function is activated and the time display counts down the seconds.
• An alarm tone will sound when the set minutes expire.
• NAP 0:00 will be flashing on the display.
• Press any button and the nap function will stop.
• To activate the nap function with the last set nap time just press the NAP button in normal mode.
8. Backlight

8.1 LCD Backlight

• Press the SNOOZE/LIGHT sensor button to adjust the brightness - 4 levels (BACKLIGHT 1-4) or to switch it off.
8.2 MOOD LIGHT mode
• Press the MOOD LIGHT button in normal mode.
• LIGHT 1 (default) appears on the display and the mood light glows red.
• Press the MOOD LIGHT button to adjust the brightness - 4 levels or to switch it off.
• When the light is on, press the COLOR MODE button to choose between 7 colours (COLOR 1-7) or continuous colour change (CYCLE).
• The setting is saved.
9. Charging function
• Attention: The charging function only works with the power adapter. Plug the USB cable into the USB port on the alarm clock and connect the
other end to your mobile device. Make sure that the charging rate is suitable for your mobile device.
10. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery if you do not use the device for a long period of time.
• Keep the device in a dry place.

10.1 Battery replacement

• Change the battery when the empty battery symbol appears on the display.
• Open the battery compartment. Insert a new battery (CR 2032), plus pole upwards.
• Close the battery compartment again.
• Note: If no battery is inserted, the battery symbol appears permanently on the display.
11. Troubleshooting
Problem Solution
➜ Connect the device to the power adapter
No display
➜ Check the power adapter
➜ Press the SNOOZE/LIGHT button to activate the backlight.
17