Gs115 Model: Disposable Bag & Filter - Cyclo Vac Schematic GS115 Manual De Instrucciones

GS115 Model: Disposable Bag & Filter
Replace the bag when full. Frequency will depend on the use of the unit.
1. To access bag, remove the power unit top cover.
2. Remove the used bag and seal bag opening
(adhesive seal provided on each bag). Discard
used bag.
3. Install the new bag, ensuring the tabs on the
bag adaptor are aligned with the slots in the bag
collar (figure 17).
4. Ensure adequate sealing by inserting bag as far
as retention ring (figure 18 - A).
Rotate bag 20° (figure 18 - B) to ensure tabs
on bag adaptor are no longer aligned with the
slots in the bag collar.
5. Put the top cover back in place.
The disc-shaped filter (figure 19), located between
the dust bag and the motor, should be changed
after three bags replacement (45 hours of use), or
more often, as needed.
Only use genuine Cyclo Vac replacement bags.
Failure to do so could void the warranty on your
vacuum unit.
24
retention ring
Maintenance
figure 17
tabs on bag adaptator
B
A
figure 18
figure 19