Operation Method - Shinco 7000 BTU Manual De Usuario

Operation Method

Cooling mode
• When the air conditioner automatically enters the cooling mode or the cooling
mode is selected after the power is turned on, the cooling control lamp lights up.
• Press the up / down button to set the temperature (16 ℃ ~ 30 ℃).
• Press the Speed button to select High / Low.
Fan mode
• When you press the mode button or select the ventilation mode by pressing the
remote control, the wind indicator lamp lights up.
• Press the Speed button to select High / Low.
• The temperature can not be adjusted.
Dehumidification mode
• When the mode button is pressed or the dry mode is selected by pressing the remote
control, the indicator lights up.
• When Ta≥17 ℃ (or 62 ° F), the compressor starts. Subsequently, it is controlled
according to the following rules: The compressor shuts off when Ta≤15 ℃ (or 59 ℉);
Restart when the temperature rises to Ta≥17 ℃.
• In dry mode, the wind speed is not adjustable and the fan runs at low speed by
default.
• Temperature can not be set.
Timer Mode
• In standby mode, press the timer button to set the ON TIME. Press the Up and
Down buttons to set time ON (0 ~ 24H) and the time indicator will light.
• When in the ON state, press the timer button to turn OFF the timer. Press the up
and down buttons to set the OFF TIME (1 ~ 24 hours) and the time indicator will
light.
Sleep mode
• In cooling mode, press the "Sleep" button on the remote control (or simultaneously
on the host, the "Timing" + "Down" button) to enter sleep mode, the fan is forced to
run at low speed, low wind light , the wind speed can not be adjusted.
• Switching the mode or pressing the "Sleep" button on the remote control (Or at the
same time the host presses the "Timing" + "Down" button), quit the sleep mode.
EN 6