Q Acoustics 1000i Serie Manual Del Usuario página 10

Connecting the 1000i Sub
Subwoofer Connections
Standard Connection via the AV SUB Input
You will need a single RCA phono interconnect. As this cable is likely to
be quite long, make sure you get a good quality fully screened cable.
Your Q Acoustics dealer will be happy to supply you with a suitable
interconnect.
AV AMPLIFIER
RIGHT LEFT
REAR LS
CENTRE LS
Connect the SUBWOOFER OUTPUT on the amplifier to the AV SUB
INPUT on the subwoofer using a suitable RCA interconnect. Push the
plugs firmly home to ensure a good contact.
If you wish to connect the 1000i Sub to a preamplifier or a spare line output
on a regular amplifier, do NOT use a Stereo to Mono 'Y' adaptor or your
sound system will be set into Mono! Your dealer will advise you about a
suitable adaptor. Alternatively, use the High Level connection.
High Level Connections
In this mode the subwoofer is connected to the amplifier together with the
Front loudspeakers. This connection should be used only if a dedicated
subwoofer line output is unavailable.
Never connect to both the high and line level inputs!
SUBWOOFER
RIGHT LEFT
SUB
OUT
FRONT LS
RIGHT SPEAKER
RIGHT LEFT
REAR LS
CENTRE LS
AV AMPLIFIER
Prepare two lengths of twin core loudspeaker cable. Unscrew the high
level terminals on the rear of the subwoofer. Connect the RED (+)
terminal on the RIGHT subwoofer input to the RED, Positive (+) terminal
on the RIGHT channel of the amplifier. Connect the BLACK (–) terminal
on this input to the matching BLACK, Negative (–) terminal on the
amplifier. Repeat this procedure for the LEFT channel. Leave the front
loudspeakers connected. The internal circuitry of the subwoofer will
combine the front channels to produce a single common bass channel.
LEFT SPEAKER
RIGHT LEFT
FRONT LS
SUB.