Medisana Medibreeze Instrucciones De Manejo página 14

GB
3 Operating
3.2
Addition of
aroma essence
3.3
Switching the
unit on and off
3.4
Regulating
nebulizer settings
3.5
Illumination
10
Do not move the unit when the water
chamber is full, as the tilting motion can
cause the water level to rise above the
nebulizer membrane, preventing it from
working. When the unit is switched off,
you can remove the nebulizer attach-
ment and use a cloth to remove
any excess water.
Dispose of the leftover water after use
and rinse out the tank with fresh
drinking water. Before using again, fill
the tank with fresh drinking water.
When you have switched off the unit and do not intend to use it for an
extended period of time, remove and empty the water tank.
If you wish to use the humidifier with an aroma essence, add approx. 5 to 10
drops of the essence to the 500 ml filled water tank. Please note that a film
may form through adding the essence! You can obtain further aroma essences
with other fragrances through MEDISANA. Do not use any oil-based fragran-
ces, as these can damage the device.
Fit the nebulizer attachment
Connect the mains adaptor lead to the socket
the mains outlet.
After a short press of the ON/OFF button
water and the fan will start up. At the same time, the button's blue LED will
light up. A further press of the ON/OFF button
The unit's automatic cut-off feature ensures that the fan and nebulizer are
automatically switched off when the water reservoir is empty.
Operating time
Level 1 when filled with 500 ml of water: approx. 9 hours.
Level 2 when filled with 500 ml of water: approx. 6 hours.
The MEDISANA Personal humidifier Medibreeze can be operated at 2
different power settings. To switch from setting 1 to setting 2, press the Flow
button once. Due to the higher fan output, more moisture is released into
the surrounding air. At the same time, the button's blue LED will light up.
The water tank in the MEDISANA Personal humidifier Medibreeze features
an internal illumination unit that can be activated with a simple press of the
Light button . A further press of the button switches the illumination off.
Illumination can be used independently of the fan and nebulizer.
When the unit switches off automatically, the illumination remains on. The
intensity of the light decreases when the nebulizer is activated.
onto the unit.
and plug the adaptor into
, the unit will start to nebulize the
switches the unit off.