Appendix E: Software Upgrade - CONTINENTAL EDISON CETVLCD40FHDR3 Manual De Instrucciones

Appendix E: Software Upgrade

• Your TV is capable of finding and updating new software upgrades over broadcast channels.
• For broadcast channels search, TV looks the available channels stored in your settings. So before software
upgrade search, it is advised to auto search and update all available channels.
1) Software upgrade search via user interface
• It is possible manually to check if there is a new software upgrade for your TV set.
• Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings
menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.
• In Upgrade Options menu select Scan for upgrade and press OK button.
• If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download
progress. When the download is completed a message is displayed asking to reboot and activate the new
software. Press ok to continue with the reboot operation. Press OK to continue with the reboot operation.
2) Over Air Download
• If Automatic scanning in Upgrade Options menu is enabled, the TV wakes up at 03:00 and searches
broadcast channels for new software upgrade. If new software is found and downloaded successfully, with
next power up the TV opens with new software version.
Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software
is finished successfully. During reboot the TV makes final initializations. In reboot sequence panel power
is closed and front led indicates the activity with blinking. Around 5 minutes later the TV restarts with new
software activated.
• If your the TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. The TV should
open with new software safely. If you still can not get the TV working, please kindly repeat unplug and plug
sequence a few times more. If your set still can not operate, please call the service personnel to fix the
problem for you.
Caution: While the LED is blinking during reboot do not unplug your TV's power. Doing this may
cause your TV not to re-start again and can only be fixed by service personnel.
English - 69 -