Yamaha YAS-71 Manual De Instrucciones página 28

LISTENING TO FM BROADCASTS
■ Recalling the preset stations
1
Press PRESET/TUNE to select preset
tuning mode.
2
Press A E or A E repeatedly to select the
desired preset group (A to E).
3
Press +/– repeatedly to select the desired
preset number (1 to 8).
Preset group and number
26
En
Preset FM station
■ Receiving Radio Data
System stations
The Radio Data System is a data transmission system used
by FM stations in many countries. The system can receive
various Radio Data System data such as PS (program
service), PTY (program type), RT (radio text) and CT
(clock time) when receiving Radio Data System
broadcasting stations.
To switch the information display of Radio Data
System
While receiving Radio Data System, press FREQ/TEXT.
Each time you press the button, the information display
changes as follows:
Information type
• PROGRAM SERVICE (PS)
Displays the currently received Radio Data System
program.
• PROGRAM TYPE (PTY)
Displays the type of the currently received Radio Data
System program.
• RADIO TEXT (RT)
Displays the information of the currently received
Radio Data System program.
• CLOCK TIME (CT)
Displays the current time.
• FREQUENCY
Displays the frequency and preset group and number.
Notes
• You can select one of the Radio Data System display modes
only when the corresponding Radio Data System indicator
lights up in the front panel display. It may take a while for the
system to receive all of the Radio Data System data from the
station.
• You can select only the available Radio Data System display
modes being offered by the station.
• If the signals being received are not strong enough, the system
may not be able to utilize the Radio Data System data. In
particular, RT mode requires a large amount of data and may
not be available even when other Radio Data System display
modes are available.
• In case of poor reception conditions, press AUTO/MAN'L to
select Manual tuning. (☞ P. 23)
• If the signal strength is weakened by external interference while
the system is receiving the Radio Data System data, the
reception may be cut off unexpectedly and "...WAIT" appears
in the front panel display.
• When RT mode is selected, the system can display the program
information with a maximum of 64 alphanumeric characters,
including the umlaut symbol. Unavailable characters are
displayed with underscores "_".
• If the reception is cut off when CT mode is selected, "CT
WAIT" appears in the front panel display.