Manual Flash - Pocket Wizard AC3 ZoneController Guia De Inicio Rapido

Manual Flash

NOTE: Make sure the camera is awake (half-press the shutter button) when changing
settings to assure AC3 settings are transmitted to remote ControlTL
Compatibility and Specifications
The AC3 ZoneController works with the following radio combinations when used with an
on-camera MiniTT1 or FlexTT5 (required):
ControlTL Radios
• FlexTT5 radios with Nikon Speedlights using i-TTL
• FlexTT5 radios with AC9 AlienBees Adapters and AlienBees, White Lightning,
or Zeus flashes
• PowerST4 radios with Elinchrom RX flashes
• PowerMC2 radios with Einstein
Note: The Elinchrom, Einstein
part of an i-TTL exposure. See the AC9 AlienBees Adapter, PowerST4 or PowerMC2
Quick Guides for their manual power output tables and other information.
Standard / Built-in Radios
• AC3 ZoneController controls zone on/off only for PocketWizard Standard Channel
Receivers with Quad-Triggering like the MultiMAX or flash packs with built-in
PocketWizard radios.
Temperature
Operating Temperature: Above -15° C (5° F) and below 50° C (120° F)
Storage Temperature: Above -30° C (-22° F) and below 85° C (185° F)
E640 flashes
™
and AlienBees flash output will not be calculated as
™
radios.
®