General Characteristics; Safety At Work; Conditions Of Use - Technoflex VIFOM Manual De Instrucciones/Lista De Recambios

1B
OPERATION
1.4

General Characteristics

The machine will be used by personnel trained for this job, it will only be used in specific jobs for
which it has been technically developed, after having read the instructions contained in this manual
and which must be fellowed correctly.
The manufacturer or authorised distributor must be consulted about any doubts.
The manufacturer Industrias Technoflex S.A., will not accept any responsibility derived from
incorrect installation, manipulation, or misuse of the Oscillating Vibro-Floating Screed.
Not acting according to the instructions indicated in this manual, will cause the cancellation of the
guarantee.
1.5

Safety at Work

You must wear eye protection when operating the Oscillating Vibro-Floating Screed to prevent injury
from concrete particles, It is also advisable to wear hearing protection against the sound produced by
the motor.
Do not attempt to handle any of the moving parts whilst the motor is running.
The manufacturer will not accept responsibilities, for accidents if they derive from structure
modification of the machine.
In adition to our recommendations the safety regulations of each country in force.
1.6

Conditions of Use

The original design of the Oscillating Vibro-Floating Screed allows you to change the working direction
of the machine, either forward or backward as desired, by simply giving the extention arm half a turn,
making it the ideal machine to attain the best grade finish on a concrete surface. Fig. 1.6-1.
1B-5
Fig. 1.6-1
ENGLISH