DeWalt DW802 Manual De Instrucciones página 14

2. Applyminimum pressure t o worksurface, allowing t oolto
operate at highspeed.Cutting rate is
greatest when the tooloperates a t high
speed.
3. Once a cutisbegun and a notch isestab-
lished intheworkpiece, donotchange the
angle ofthecut.Changing theangle will
cause thewheel to bend andmay cause
wheel breakage.
4. Remove thetool f rom work surface b efore
turning t ool o ff. A llow the tool t ostop rotatingI I
before s etting i tdown.
MAINTENANC_
Cleaning
,& WARNING: Blow dust and grit out of the motor housing regularly
using clean, dry compressed air. Dust and grit containing metal
particles often accumulate on interior surfaces and could create an
electrical shock hazard ff not frequently cleaned out. ALWAYS
WEAR SAFETY GLASSES.
,&CAUTION: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. Use a clean, dry
cloth only.
£ubrication
DEWALT tools are properly lubricated at the factory and are ready
for use.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement)
should be performed by a DEWALT factory service center, a
DEWALT authorized service center or other qualified service per-
sonnel. Always use identical replacement parts.
Purchasing Accessories
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory for your tool, please
contact DEWALT Industrial Tool Co., 701 East Joppa Road,
Baltimore, MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or
visit our website www.dewalt.com.
_CAUTION: The use of any other accessory not recommended
for use with this tool could be hazardous.
Three Year Limited Warranty
DEWALT will repair, without charge, any defects due to faulty mate-
rials or workmanship for three years from the date of purchase.
This warranty does not cover part failure due to normal wear or tool
abuse. For further detail of warranty coverage and warranty repair
information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-
433-9258). This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others.
This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, DEWALT tools are covered by our:
1 YEAR FREE SERVICE
DEWALT will maintain the tool and replace worn parts caused by
normal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
DEWALT Power Tool, Laser, or Nailer for any reason, you can
return it within 90 days from the date of purchase with a receipt for
a full refund - no questions asked.
12