Features; Operation Instructions - Urrea CC904 Manual De Usuario

9. The use of this tool might create and/or
spread dust that may cause serious and perma-
nent respiratory, and other, injuries. To reduce
the exposure to these substances, work in well-
ventilated places and always use dust mask.
10. This product must not be used by people
who are likely to lose consciousness suddenly.
Example: (Epilepsy, low or high blood pressure,
sunstroke, etc.)

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
1
5
6
1. ON/OFF SWITCH.
2. LOCK-ON BUTTON FOR CONTINUOS OPERA-
TION.
3. CUTTING DEPTH SCALE.
4. BOLT.
5. CARBON BRUSH ACCESS
6. SCALE FOR BEVEL CUTTING
1. Unplug from the power outlet before per-
forming any kind of adjustment, change of
accessory or storing the tool. These preventive
safety measures reduce the risks of electrical
shocks and of turning the tool on by accident;
2. Do not overload your tool, use it only for
the adequate purpose. The correct power tool
will do the job in a better and safer way. Using
the power tools for purposes that are differ-
ent from what is indicated in the manual might
lead to hazardous situations;
3. Perform maintenance on your power tool.
Check if the moving parts are misaligned, bent
or broken, or if they bear any condition that
10
might affect the correct operation of the ma-
chine.
In case of fi nding an abnormality that can't be
solved, or if in doubt, have the tool serviced
before using it again.
Many accidents are caused by lack of correct
maintenance of power tools;
4. Keep the cutting tools sharp and clean. The
proper maintenance of the tool's cutting edg-
es prevents them from bending and improves
handling.
5. Keep hands away from the cutting blade
and the cutting area, never put your hands un-
der the workpiece, because the cutting blade
might cause serious injuries.
2

OPERATION INSTRUCTIONS

USE: The machine is intended for the horizon-
tal cutting or slitting of mainly mineral materi-
als such as marble;
it should be operated with a protective guard
and positioned on a firm base.
3
• The machine is intended for wet cutting in
specific executions; the machine was not made
for cutting wood plastic or metal.
ASSEMBLY AND ADJUSTMENTS
1. Before plugging your tool into the power
outlet, check if the local power supply and
4
your tool have the same voltage. Check if the
tool is in good conditions by performing a
quick visual inspection.
If any abnormality is found, immediately sus-
pend the use and contact the nearest Schulz
authorized dealer for repair.
2. To turn the tool on press the on/off button.
For continuous use press the lock-on button to
keep the tool operating. Press the on/off but-
ton to unlock.
adjustments, the tool must be always turned
off, the power cord must be unplugged from
the power outlet and the blade must be
stopped.
INSTALLING AND REMOVING CUTTING BLADE
INSTALLING:
1. Place the blade on the backing flange.
2. Tighten the flange nut firmly with the
wrench and, simultaneously, turn the socket
tool anti-clockwise.
ATTENTION: For assembly and disassembly