Installation; Battery Compartment - Intelbras TOK Facil Manual Del Usuario

7. 3 direct memory keys
8. MEM key
9. Call LED
10. FLASH key
11. Numerical keys (indirect memories)
12. REDIAL/ key
13. Hole for wall mouting

14. Battery compartment

Installation

Connect one end of the spiral cord to the phone jack and the other end of
the cable to the jack located at the left side of the base. Then, connect one
end of the line cord to the LINE jack (item 6) and the other end to the line
socket on the wall.
Battery compartment
The batteries are used to save the numbers stored in the memory in case there
is a need to disconnect the phone from the telephone line.
To insert the batteries, please proceed as follows:
1. First, disconnect the cord from the telephone line socket before inserting
the batteries;
2. Use a philips screw driver to open the cover located at the bottom side
of the phone;
3. Insert 2 x AAA batteries, as per polarity indications (+ and –);
4. Close the cover and connect the telephone line cord to the wall socket.
Note: the batteries are not included with the product.
22