Delivery Scope And Transport Inspection; Setup Location Requirements - Caso C5 Manual Del Usuario

10.2 Delivery scope and transport inspection

As a rule, the Designer multi grater is delivered with the following components:
• Designer glass scales C5
• Operating Instructions
10.3 Unpacking
• Remove the device out of the carton and remove the packaging material.
10.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces
the quantities of accumulated waste. Take any packaging materials that are no
longer required to "Green Dot" recycling collection points for disposal.
10.5 Setup
10.5.1

Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup
location must fulfil the following prerequisites:
• The device must be set up on a firm, flat and horizontal surface with sufficient load-
bearing capacity for the scale and the maximum weight of the food that should be
weighed.
• Choose the setup location in such a way that children cannot reach the device.
• Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
► Examine the shipment for its completeness and for any
visible damages.
► Immediately notify the carrier, the insurance and the supplier
about any incomplete shipment or damages as a result of
inadequate packaging or due to transportation.
► If possible, keep the original packaging for the device for the
duration of the guarantee period of the device, in order that
the device can be re-packaged properly in the event of a
guarantee claim.
Please note
Please note