Display Messages - Yamaha NP-S303 Manual De Instrucciones

Display messages

Message
Access denied Access to the PC (or server) has been denied.
Access error Unable to access the USB device.
There is a problem with the signal path from the network to the unit.
No content There are no playable files in the selected folder.
Please wait The unit is preparing to connect to the network.
Unable to play Unable to play a music file stored on your USB device.
Unable to play a music file stored on your PC (or server).
Version error Firmware update failed.
52
En
Meaning Solution
Modify the media sharing settings so that the unit will be able to access the folders on the PC (or
server) (page 33).
Turn off the power to the unit, turn it on again, and then reconnect the USB device. If the problem
persists, move the music files to another USB device and try again.
Make sure that your router and modem are turned on.
Check the connection between the unit and your router (or hub) (page 19).
Select a folder that contains files supported by the unit.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and
then turn it on again.
Check to see whether the file format is supported by the unit. If other devices are unable to play
the file, the song data might be corrupt.
Check to see whether the file format is supported by the unit. For information on music files
supported by this unit, please refer to "Supported devices and file formats" (page 53). If the unit
supports the file format, but still cannot play any files, the network may be overloaded with heavy
traffic.
Update the firmware again (page 46).