Bodypack Transmitter (Optional); Lavalier Tie-Clip Microphone; Headset Microphone; System Connections - Power Dynamics PD781 Manual De Instrucciones

BODYPACK TRANSMITTER (OPTIONAL)

LAVALIER TIE-CLIP MICROPHONE

Connect the connecter of supplied lavalier microphone to the connecting jack of transmitter (Shown as below).
Set the transmitter work state in wireless lavalier system (8).

HEADSET MICROPHONE

Connect the connecter of supplied headset microphone to the connecting jack of transmitter (Shown as below).
Set the transmitter work state in wireless headset system (8).

SYSTEM CONNECTIONS

1. Receiver power connection: Connect the AC adapter into the DC power connector on the back of the receiver.
Plug the AC adapter into a AC230V 50Hz outlet.
1. Power ON/OFF and Audio mute switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Belt Clip
4. Audio Input Jack: it is suitable for lavalier tie-clip or
headset system.
5. Low Battery Indicator: Red light glows when the
power is low and change the battery.
6. LCD Information Display: Show the transmitter
frequency channel ect.
7. Gain Adjusting Volume: Adjust the transmitter audio
input gain.
8. State Setting Switch: Set the using state of lavalier
tie-clip or headset system.
9. Up Function Button: Sets channel data.
10. Down Function Button: Sets channel data.