Features; Operation Instructions - Surtek SS815A Manual De Usuario

• Do not hold the blade toward your face
when removing the blade. The blade will au-
tomatically fall off when the clamp is released.
• Become familiar with the operation of the
reciprocating saw. Read this Owner's Manual
carefully. Learn the applications, limitations,
and specific, potential hazards related to this
reciprocating saw. Following this rule will re-
duce the risk of electric shock, fire, and serious
injury
• Always wear safety glasses with side shields.
Everyday eyeglasses may have impact resistant
lenses, but they are NOT safety glasses. Follow-
ing this rule will reduce the risk of eye injury.
• Protect your lungs. Wear a face mask or dust
mask if the operation is dusty. Following this
rule will reduce the risk of serious personal in-
jury.
• Protect your hearing. Wear hearing protec-
tion during periods of extended operation.
Following this rule will reduce the risk of seri-
ous personal injury.

FEATURES

BECOME FAMILIAR WITH THE RECIPROCATING
SAW
Before attempting to use this reciprocating
saw, become familiar with all of its operating
features and safety requirements.
This reciprocating saw features the ideal speed/
stroke combination for efficient cutting. For
optimum performance and safety, read the fol-
lowing operating instructions before using.
WARNING: Do not allow familiarity with the
reciprocating saw to cause a lack of alertness.
A fraction of second of carelessness is enough
to cause sever injury.
2
1
6
1. SAW BLADE
2. LED LIGHT
3. TRIGGER WITH VARIABLE-SPEED
4. ON/OFF LED BUTTON
5. TOOL-FREE BLADE CHANGE SYSTEM
6. BASE (SHOE) ASSEMBLY
4
3
5
E N G L I S H •
LED WORK-LIGHT
Your Reciprocating Saw has a LED work-light
that will light up when you press the yellow
button located on the top of the machine.
This provides additional lighting on the surface
of the workpiece for operation in lower-light
areas.
WARNING: Remove the reciprocating saw
from the package, and examine it carefully. Do
not discard the carton or any packaging mate-
rial until all parts have been examined.
WARNING: If any part of the reciprocating
saw is missing or damaged, do not use the saw
until the part has been repaired or replaced.
Failure to head this warning could result in se-
rious injury.

OPERATION INSTRUCTIONS

TRIGGER SWITCH
1. Depress the trigger
switch to turn the saw
ON.
2. Release the trigger
switch to turn the saw
OFF.
VARIABLE SPEED
The trigger switch delivers higher speed with
increased trigger pressure, and lower speed
with decreased trigger pressure.
INSTALLING A SAW BLADE
1. Disconnect the saw
from the power sup-
ply.
2. Open the blade-
clamp lever. Insert
the saw blade into
the blade clamp as
far as possible, and
close the blade-clamp
lever to lock the blade in position.
REMOVING THE SAW BLADE
1. Disconnect the saw from the power supply.
2. Open the blade-clamp lever.
3. Remove the saw blade from the blade
clamp.
U se r' s m a nu a l
11