Care And Cleaning; Helpful Hints; Before Initial Use - Sunbeam FPSBFDM922 Manual De Instrucciones

LEARNING ABOUT YOUR
FLIP DONUT MAKER
a
Red Power Light Indicator
b
Green Bake Ready Light Indicator
c
Upper Housing
d
Upper Plate
e
Bottom Plate
f
Bottom Housing
g
Drip Tray
h
Locking Handle
h

BEFORE INITIAL USE

1. Remove all packaging.
2. Clean the baking plate with a soft damp cloth and then allow to dry.
3. Slightly grease the baking plates with a little cooking oil.
4. Take care to prevent water from running into the appliance.
5. Unwind the electric cable completely.
NEVER IMMERSE COOKING SURFACES IN WATER.
Questions? Need help?
Please call 800.458.8407 or visit us at www.sunbeam.com.
-4-
1. Insert the plug into a 120 volt power outlet. The Power Light indicator will turn on.
2. Allow your Flip Donut Maker to pre-heat until the 'BAKE READY' light comes on.
This indicates that the cooking plates have reached the correct temperature for cooking.
3. When your Flip Donut Maker is heated for the first time it may emit slight smoke or odor,
a
this is normal with heating appliances. This does not affect the safety of your appliance.
4. For best results, lightly spray the cooking plates with a cooking oil spray before
using. This will assist in the removal of the donuts after cooking.
5. Divide mixture into pan holes as per recipes using a spoon, fabric piping bag or pitcher.
b
NOTE: Do not use disposable plastic piping bags as these may melt if they come into
c contact with hot plates. Surfaces are HOT.
6. Spread lightly to fill entire shape. Try not to overfill; batter will expand when cooked.
7. Gently close the lid. Ensure lid locks into place. Do not slam the lid down as it may
cause the mixture to run off the cooking plates.
d
8. Flip the appliance so it evenly cooks the batter on both sides right after you fill the
cavities with batter.
9. Allow to cook for approximately 5–6 minutes or until golden.
10. Flip the appliance before opening to original position.
11. To remove donuts, always use a plastic or wooden spatula. Never use a sharp object
or metal, as this will damage the non-stick surface of the cooking plates.
12. Surfaces are HOT.
This appliance should be cleaned after every use.
e
1. Always unplug Flip Donut Maker from outlet when not in use or before cleaning.
Allow unit to completely cool before cleaning.
f
2. The cooking plates are coated with non-stick cooking surface, therefore little
cleaning is required. Simply wipe cooking plates over with a damp cloth.
3. Do not immerse the donut maker in water or other liquids. Do not use abrasive
scouring pads, powders or cleaners. Before next use; lightly grease the cooking
g
plates for easy removal of cooked donuts.
4. DO NOT WASH IN DISHWASHER.
1. Finished donuts can be frozen and re-heated for later use.
2. To re-heat: simply toast under a griller, in a toaster or a moderate oven until crisp and
heated through.
3. Cooking times for donuts may vary depending on the donut mixture.
4. Always ensure the plates are greased before cooking, to make the removal of cooked
donuts easy.
HOW TO

CARE AND CLEANING

HELPFUL HINTS

-5-