Wireless Settings - Canon MR-14EX II Manual De Instrucciones

Wireless Settings

To perform wireless multiple flash shooting with E-TTL II/E-TTL
autoflash, set the master unit and slave unit with the following
procedure.
Master Unit Setting
When C.Fn-15 is set to 0 (p.63), check that <^>,
<l>, and <6> are displayed (p.49).
When C.Fn-15 is set to 1 (p.63), press the <,> button and
select the flash method from the options below (p.53).
• <_> and <j>
• <%> and <l>
• <^> and <l> <6>
Slave Unit Setting
Set firing groups (A, B, and C) for the slave flash units, referring to the
instruction manual of the EX-series Speedlite equipped with the slave
function.
To perform normal flash shooting, press the <,> button to clear the
settings for the master unit.
Display <:> and <M>.
Press the <,> button to display
<:> (optical transmission wireless)
M
and < >.
47