Pc Camera (Option) - bto X.Book 17CL50 Manual Del Usuario

PC Camera (Option)

Before installing the PC Camera driver, make sure the
PC Camera module is powered on. Use the Fn + F10 key
combination to toggle power to the PC Camera module.
When the PC Camera module is powered on, the on-
screen visual indicator
When the PC Camera application is run the LED indicator
to the left of the camera will be illuminated in red (see
tem Map: Front View with LCD Panel Open on page
PC Camera Driver Installation
1. Click Option Drivers (button).
2. Click 1.Install Webcam Driver > Yes.
3. Click Finish to restart the computer.
OR
Click Next > Finish.
4. Run the camera application from the desktop shortcut.
PC Camera Application and Power-Saving States
If the computer enters Sleep or Hibernate mode while
running the camera application, the program will stop run-
ning, and will need to be restarted when the system re-
sumes from the power-saving state.
22
w ill briefly be displayed.

PC Camera Audio Setup
If you wish to capture video & audio with your camera, it
is necessary to setup the audio recording options in Win-
dows.
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Sound (Hardware and Sound).
Sys-
3. Click Recording (tab).
7).
4. Right-click Microphone (Realtek High Definition Audio) and
make sure the item is not disabled.
5. Double-click Microphone (or select Properties from the right-
click menu).
6. Click Levels (tab), and adjust the Microphone and
Microphone Boost sliders to the level required.
7. Click OK and close the control panels.
8. Run the camera application from the desktop shortcut.
9. Go to the Devices menu heading and select Microphone
(Realtek....) (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it
should have a tick alongside it).
11. To obtain the best sound recording quality enable Noise
Supression in the Realtek HD Audio Manager control panel
(see Setup for Audio Recording on page 18).