Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Problem
Slow running, noisy or hot
blades.
Unit will not start.
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
8
TROUBLESHOOTING
Possible Cause
•
Dry, corroded blades.
•
Blades or blade support bent.
•
Bent or damaged teeth.
•
Loose blade bolts.
•
Lock off not fully operated.
•
Cord not plugged in.
•
Circuit fuse is blown.
•
Circuit breaker is tripped.
•
Cord or switch is damaged.
Possible Solution
•
Lubricate blades.
•
Straighten blade or blade support.
•
Straighten teeth.
•
Tighten blade bolts.
•
Check that lock off is fully forward prior to
moving main trigger.
•
Plug cord into a working outlet.
•
Replace circuit fuse. (If the product
repeatedly causes the circuit fuse to blow,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
•
Reset circuit breaker. (If the product
repeatedly causes the circuit breaker to trip,
discontinue use immediately and have it
serviced at a BLACK+DECKER service center
or authorized servicer.)
•
Have cord or switch replaced at
BLACK+DECKER Service Center or
Authorized Servicer.
Publicidad
Tabla de contenido
