Celestron 44341 Manual De Instrucciones página 5

Microscopio digital lcd ii
Ocultar thumbs Ver también para 44341:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Digital Light Adjustment
The LCD Digital Microscope adjusts to the light digitally through the EV (Exposure Value) adjustment, similar to a digital camera.
Press and hold the MENU button to access the SETTINGS menu. Scroll to the EXPOSURE tab and press SELECT. In the EXPOSURE window, adjust the EXPOSURE UP
(brighter) or DOWN (darker) using the NAVIGATION buttons. (see Figure 7)
Tip: Viewing a specimen that is very dark in color decreases the amount of light that can shine through it from the BOTTOM illuminator. To correct this, you will need to
increase the exposure setting by switching the illuminators to their highest setting.
Viewing a Specimen
Your digital microscope is equipped with a mechanical stage with adjustment knobs and a self adjusting lever-action holding clamp. (see Figure 8 below)
1. Use the thumb arm on the self adjusting lever action holding clamp to open the clamp.
2. Place a specimen slide (3" x 1" / 76.2 x 25.4 mm size) inside the holder and release the clamping arm, securing the slide in place.
3. Use the stage adjustment knobs to position the specimen over the opening in the stage. The rear stage adjustment knob moves the X axis (forward and backward)
whereas the front stage adjustment knob moves the Y axis (side to side).
Note: A vernier scale on both axes allows the exact marking and replication of an object in the field of view.
Stage Adjustment
Knob - Rear
Stage Adjustment
Knob - Rear
Self Adjusting
Lever Action
Holding Clamp
TOP Illuminator
Fig. 6
BOTTOM Illuminator
Fig. 7
Fig. 8
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Microscope ii

Tabla de contenido