Celestron 44341 Manual De Instrucciones página 7

4. DATE: Select this menu item to set the Date and Time and to have the time stamp show up in the video or still image
5. LANGUAGE: Select this menu item to choose between 11 languages for the user interface. Choose between, English, Traditional Chinese, Simple Chinese, German,
Spanish, Portuguese, Italian, French, Japanese, Korean and Russian
6. TV OUT: Choose between the standards NTSC and PAL settings:
• NTSC (National Television System Committee) is used in Canada, Chile, Costa Rica, Cuba, Dominican Republic, Ecuador, Japan, Mexico Nicaragua,
Panama, Peru, Philippines, Puerto Rico, South Korea, Taiwan and U.S.A.
• PAL (Phase Alternating Line) is used in Afghanistan, Algeria, Argentina, Austria, Australia, Bangladesh, Belgium, Brazil, Bulgaria, China, Denmark,
Finland, Germany, Hong Kong, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Jordan, Kenya, Kuwait, Liberia, Malaysia, Netherlands, Nigeria, Norway, New
Guinea, Pakistan, Singapore, South Africa, South W. Africa, Sudan, Sweden, Switzerland, Thailand, Turkey, Uganda, United Kingdom, United Arab Emirates, Yugoslavia,
Zambia and Zimbabwe
7. IMAGE SIZE: Choose pixel ratios for still shots and video here
8. TIME LAPSE: Select this menu item to take time lapse photos and to set the interval between the photos
9. MEASURE: Select this menu item to turn the measuring reticle on and choose between two styles and 3 display colors
10. DEFAULT SETTING: Returns all settings to the default setting. The Default settings are as follows:
Mode: Camera or Still Shot Imaging
Exposure: +0
Image Effects: Normal
Date: Off
Language: English
TV Out: NTSC
Image Size: 2560 x 1920
Time Lapse: Off
Measure: Off
Taking Images
1. STILL IMAGES: To take a still image, make sure you first install your included 1G SD card (or your own SD card- max. size 32G) into the SD Card Slot (2) on the LCD
housing. Make sure you are in camera mode by confirming the camera icon is displayed on the LCD screen. When ready, press the SELECT button and the
image will be saved to the SD card.
2. VIDEO: Make sure you are in the VIDEO mode and the icon is displayed on the main screen . Begin recording by pressing the SELECTION button. When video
is recording the recording icon
Note: Inserting or removing an SD card while the LCD is on may cause the LCD to shut down and/or could damage the SD card.
Sample Images
The following specimen images left to right below were taken at 40x, 100x, 400x of Vicia Faba Young Root C.S.
Reviewing and Managing Your Images
You can review and manage your snapshots and videos that are saved on the SD card.
1. Press and hold the MENU button until the SETTINGS menu opens. Press the
SELECTION button when the SD CARD menu item is highlighted
(see Figure 11).
2. Select the VIEW IMAGES menu item. Then scroll using the NAVIGATION
buttons to the image you want to see. Press SELECT and the image with fill
the screen. When you press the NAVIGATION buttons in this screen, it will
scroll through all the images you have stored on the SD card. The process
is the same for video. To review the video, use the SELECTION button.
will appear on screen and blink. To stop recording, press SELECTION button again.
Fig. 11
7