Setting Spool Pins; Presser Foot Lifter; Thread Cutter; Accessory Box - Sears Singer Manual De Instrucciones

Setting Spool Pins
(_ Spool pins
The spool pins are used for holding the spool of thread in order
to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.
NOTE:
When using thread which has tendency to tangle around spool
pin, thread through thte hole of spool pin as shown.
The hole should face the thread spool.
Presser F oot Lifter
Presser foot lifter
Normal up position
Highest position
The presser foot lifter raises and lowers the presser foot.
You can raise it about 1/4" (0.6 cm) higher than the normal
up position for easy removal of the presser foot, or to help
you place heavy fabric under the foot.
J
J
Th read Cutter
(_ Thread cutter
You do not need a pair of scissors to cut threads after
sewing. Simply use the built-in thread cutter.
Accessory Box
Sewing accessories are conveniently located in the box.
8