Battery Charging - Wolder miBuk Ilusion Manual De Usuario

3. Preparation for Usage

Battery charging

Before first using your device, fully charge the battery. The first battery charging should last not
shorter than eight hours. Then the battery should be charged until the charging indicator
shows that the battery is fully charged.
Charging via USB
1. Connect the reader to the USB port of your computer using the cable supplied
2. After the reader is connected to your computer, a USB icon will appear on the display, click
the Safely Remove Hardware icon in the bottom right-hand corner but do not disconnect the
reader from the computer, and then the device will start charging.
4. Quick Start Guide
4.1 Turning the Device on
Press and hold the Power button for 5 seconds
4.2 Main Menu
a) History
Press OK to enter this menu. After entering the History, you can see the last 10 books
read.
Press OK to start reading.
Use the arrow buttons to select the book.
Press to exit this menu.