Siemens THE PROBE Instrucciones De Funcionamiento página 4

Mounting
Mount The Probe so that the face of the sensor is at least 25 cm above the highest
Note:
anticipated level.
Threaded
The Probe is available in three thread types:
2" NPT, 2" BSP or PF2.
Before inserting The Probe into its
Note:
mounting hole, ensure that the threads are of
the same type to avoid damaging The Probe
threads.
Flange Adapter (optional)
The Probe can be fitted with the optional 75 mm
(3") flange adapter for mating to 3" ANSI, DIN
65PN10 and JIS 10K3B flanges.
Sanitary
• Mount The Probe so that the face of
Notes:
the sensor is at least 25 cm above
the highest anticipated level.
• The sanitary Probe is suitable for
chemical clean-in-place
applications to 60 °C (140 °F) only.
Ensure your cleaning chemicals are
compatible with PVDF.
• mount The Probe onto the top of
the tank's sanitary ferrule
• secure mating by surrounding
the joint with the clamp
• tighten adjusting wing nut
Inside of sanitary
Note:
ferrule must be smooth, free of
burrs, seams or ridges.
Page 2 The Probe – INSTRUCTION MANUAL
hinged lid
7 mm
(0.3")
117 mm
(4.6F")
cable entry
'knock out'
279 mm
(11")
87 mm
(3.4") ø
74 mm
mounting
thread
61 mm
(2.4")
optional
The Probe
flange
adapter
7 mm
hinged lid
(0.3")
117 mm
(4.6")
cable entry
'knock out'
279 mm
(11")
87 mm
(3.4") ø
76 mm
integral
sealing ring
61 mm
(2.4")
4" Sanitary Ferrule
The Probe
clamp
adjusting
wing nut
ferrule
tank
dimensions are approximate
84 mm
(3.3") max.
electronics
mounting
thread
sensor
(2.9")
53 mm
(2. 1 ")
ø max.
84 mm
(3.3") max.
electronics
mounting
thread
sensor
(2.9")
53 mm
(2. 1 ")
ø max.
119 mm (4.68")
97 mm (3.83")
7ML19985GD62