EN
These instructions are designed for the installation engi-
neer to assemble the product and for the user to operate
and maintain it. After installation, please pass them on to
the user for safekeeping.
Symbols and their meaning
Caution! Warning of personal injury or material
damage.
Caution! Warning of electric shock.
Caution! Warning of water damage.
Note, tip or reference
Correct assembly/functional test
Incorrect assembly
Observe assembly details
Optional/accessories
Safety Information
– The electrical installations must be undertaken by a
specialist electrical installer in compliance with IEC
60364-7-701/VDE 0100 Part 701! National and local
regulations must be taken into consideration!
– Do not start the appliance if it or the power supply ca-
ble is damaged, but have it replaced by the manufac-
turer, its customer service or by an equally qualifi ed
person.
– Do not look directly into the active light source!
Intended use
DALI-controllable shower light for use in moist rooms,
such as bathrooms and WCs.
This light is DALI-controllable and must be connected
up correspondingly. More information can be found
in the system manual which is included with the DALI
power supply (order No.: 16899 000004) or can be
downloaded at www.keuco.com.
The product is suitable only for mounting indoors!
Caution! Only install in frost-free rooms.
4
Important information, please read!
Technical data
Mounting dimensions, see page 2.
Installation, see fi gure 1 onwards on page 12.
Connection (NYM-J 5x1.5 / 7.1-10 mm), refer to fi gure 10 on
page 13.
Operation
Replacement parts with order numbers, see page 15.
Declaration of conformity! This product complies with
the requirements of the valid EU Guidelines. The dec-
laration of conformity for this product can be requested
from the following address:
KEUCO GmbH & Co. KG, Oesestraße 36,
D-58675 Hemer.
– Flow at 3 bar pressure:
– Supply voltage:
– DALI current consumption:
– Max. power consumption:
– Protection category:
– Ambient conditions
Temperature:
– Luminous colour:
– Lighting current:
– Preset DALI group:
L
= brown
N
= blue
= green/yellow
DA+
= grey
DA-
= black
The light is to be integrated in the DALI system and can
be operated by an external button with a suitable group
controller.
The light sources may only be replaced by the
manufacturer, its customer service or by an equally
qualifi ed person.
For information about warranty and maintenance, see
the enclosed Maintenance and Warranty Passport.
Disposal information! Equipment with this labelling
must not be disposed of in household refuse, but must
be disposed of at a collection centre intended for this
purpose.
max. 15 l/min
220V-240V AC / 50Hz/60Hz
2 mA
12 W
IP65
5° – 40° C
2700 – 6500 Kelvin
1300 lm
3