Preparation; Use Micro Sd Card; Charge The Battery - Brigmton BTPC-4-B Manual De Instrucciones

Time
Wi-Fi
Battery

Preparation

2.5

Use Micro SD card

This unit support Micro SD Card up to 32GBB.
Plug-in: face the front side (the side with prints) Micro SD card
upwards (the direction in which the machine's display screen faces)
and connect it with the machine by plugging it with slight force into
the card slot of the machine. Now the machine can play the files in the
card.
Plug-out: push Micro SD card inwards slightly, it will spring back for
certain length, and then take it out.
2.6

Charge the battery

The battery must fully charge up before you start to use it. You can
charge the unit by connect it to a USB port of PC or the attached
adapter.
When unit used for a certain period, the battery is going to low
electricity, the battery icon show low battery, it is the time to charge
up the battery again. If you don't charge up the battery, then the unit
will turn of automatically, After the unit charge up again, unit will
working perfectly.
2.7 Power ON/OFF/Standby
POWER ON: Pressing Power key to turn on the unit.
POWER OFF: During display the main interface page, Pressing Power
button for 5s to turn off the unit, then click "YES", the unit will power
off.
POWER SAVING STANDBY: During power on, pressing Power key to
enter power saving standby mode, press Power key again back to
normal mode.
Display current time
MID has join up the internet via Wi-Fi. the more
the signal, the stronger the signal is
Showing the volume of battery or charging state.
26