Monacor PA XA-380USB Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
8) When an announcement is made via the wire-
GB
less microphone or via a microphone connected
to the jack MIC 1 (5), the signals of the MP3
player and the input signals of the jack AUX (7)
can be faded out automatically in order to make
the announcement intelligible. For this purpose,
activate the crosstalk function with the button
VOICE PRIORITY (3).
9) After operation, switch off the active speaker
system with the switch POWER (24) [central
position
]. Switch off the wireless microphone
with the switch (34) [position OFF].
5.1 MP3 player
1) When the active speaker system is switched on,
also switch on the MP3 player: Keep the button
(13) pressed until the display (10) lights up.
(To switch off, keep the button pressed until the
display is extinguished.)
If a USB flash drive or an SD / MMC card has
been inserted, the first title starts after loading; if
not, the display shows
2) To replay audio files from a USB flash drive, con-
nect it to the USB port (9). To replay audio files
from an SD / MMC card (up to 32 GB), insert the
card into the slot SD (14), the notched corner to
the right and facing the unit. To remove the card,
slightly push it in to eject the card from the slot.
After loading, the first title starts. The display
alternately shows the folder number and the title
number. The folder number is marked F. In addi-
tion, the time already played of the title is indi-
cated (min. : sec.).
3) To operate the MP3 player, use the buttons
(11 – 13, 16 – 19) on the right of the display:
To select the previous title or the next
title. To select the previous folder or the
next folder, keep the button pressed
until the desired folder number is
shown (F . .).
VOL
To adjust the volume of the MP3 player
14
.
REC
For MP3 audio recordings
Press the button. After a while the dis-
play shows
recording with the control LEVEL (15).
For this purpose, use the adjusting key
(33). The LED PEAK next to the control
is used as an indication; it may only
briefly light up at the highest volume.
Note: The volume of the recording is also
defined by the volume adjusted for the active
speaker system.
Press the button REC once again. The
indication
before the recording starts and the
time indication on the display is acti-
vated. To stop the recording, press the
button
.
The recordings are stored in the folder
RECORD which is indicated as
(Folder record). To replay the record-
ings, select this folder with the buttons
.
To switch between replay (indication )
and pause (indication )
RPT
To switch between:
continuous repeat of all titles
indication REP
repeat of the current title
indication
1
no repeat function
no indication REP
replay of the titles in a random order
indication REP
SD / USB To switch between USB flash drive and
SD / MMC card
To stop the replay or a recording (press
the button briefly) and to switch the
MP3 player on and off (keep the button
pressed until the display lights up or is
extinguished).
. Adjust the level of the
starts flashing briefly
(basic setting)
ALL
REP

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

17.3740

Tabla de contenido