Monitoring The Channels; Microphone Announcements - IMG STAGELINE MPX-622/SW Manual De Instrucciones

Ocultar thumbs Ver también para MPX-622/SW:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
4) The crossfader (6) allows fading between two
of the channels CH 1 – CH 4 . For this, select the
desired channels with the C . F . ASSIGN switches
A and B (7):
C .F . ASSIGN A: position 1, 2 or 3 to select
channel CH 1, CH 2 or CH 3
C .F . ASSIGN B: position 2, 3 or 4 to select
channel CH 2, CH 3 or CH 4
If the respective switch is in 0 position, no chan-
nel is selected .
When moving the crossfader to the left, the
channel selected with the C .F . ASSIGN  A
switch is faded in and when moving the fader
to the right, the channel selected with the
C .F . ASSIGN B switch is faded in . If the fader is in
mid-position, both channels are fed to the out-
puts at the same time . To switch off the fading
function, set both C .F . ASSIGN switches to 0 .

5.2 Monitoring the channels

With the monitoring function, it is possible to mon-
itor each individual input channel CH 1 – CH 4 as
well as the MASTER channel via headphones . The
level of the signal monitored is independent of
the position of the corresponding channel fader .
1) Connect stereo headphones (impedance ≥ 8 Ω)
to the jack (16) .
2) Press the corresponding button (10) of the
channel .
3) Adjust the desired headphone volume with the
LEVEL control (15) .

5.3 Microphone announcements

1) Adjust the desired volume with the LEVEL con-
trols (5) for the microphone channels MIC 1
and MIC 2 .
2) Adjust the desired sound with the controls (2):
the low (BASS) and high (TREB) frequencies may
be attenuated or boosted by up to 10 dB .
3) To make it easier to understand a microphone
announcement, the levels of the channels
CH 1 – CH 4 may be attenuated by 15 dB . For
this, set the talkover switch (8) to TALK position .
In OFF position, the talkover function is
switched off .
All rights reserved by MONACOR
reproduced in any form or by any means for any commercial use.
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be
®
6 Specifications
Inputs
2 × mic: . . . . . . . . . . . . . . . 1 mV/ 600 Ω
2 × phono, stereo: . . . . . . . 3 mV/ 50 kΩ
6 × line, stereo: . . . . . . . . . . 150 mV/ 100 kΩ
Outputs
1 × amp, stereo: . . . . . . . . . 0 .775 V/ 600 Ω
1 × record, stereo: . . . . . . . 0 .775 V/ 600 Ω
1 × headphone, stereo: . . . . ≥ 8 Ω
General
Frequency range: . . . . . . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . . . . 0 .1 %
S / N ratio: . . . . . . . . . . . . . . 65 dB
Equalizer controls
3 × low: . . . . . . . . . . . . . ±10 dB /100 Hz
1 × mid . . . . . . . . . . . . . . ±10 dB /1 kHz
3 × high . . . . . . . . . . . . . ±10 dB /10 kHz
Talkover: . . . . . . . . . . . . . . . –15 dB
Power supply: . . . . . . . . . . . 230 V/ 50 Hz
Power consumption: . . . . . . 10 VA
Admissible
ambient temperature: . . . . . 0 – 40 °C
Dimensions (W × H × D): . . 482 × 89 × 95 mm,
Weight: . . . . . . . . . . . . . . . 2 .4 kg
Connections
Mic: . . . . . . . . . . . . . . . . . . 2 × 6 .3 mm jack
Headphones: . . . . . . . . . . . 1 × 6 .3 mm jack
All other audio connections: 20 × RCA
Subject to technical modification .
2 rack spaces
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

20.2210

Tabla de contenido