Emc And Safety Standards Applied; Fcc Compliance Statement For American Users; For Canadian Users; Safety Precautions - Epson TM-T58 Manual Del Usuario

English

EMC and Safety Standards Applied

Product Name: TM-T58
Model Name: M237A/B
The following standards are applied only to the printers
that are so labeled. (EMC is tested using the EPSON
power supplies.)
Europe: CE marking
Safety: EN 60950-1
North America: EMI:
Safety: UL 60950-1/CSA C22.2
Japan: EMC: VCCI Class A
Oceania: EMC: AS/NZS CISPR22 Class B
Russia: GOST-R (IEC 90650-1, CISPR22)
WARNING
The connection of a non-shielded printer interface cable
to this printer will invalidate the EMC standards of this
device. You are cautioned that changes or modifications
not expressly approved by Seiko Epson Corporation
could void your authority to operate the equipment.
CE Marking
The printer conforms to the following Directives and
Norms:
Directive 2004/108/EC EN 55022 Class B
EN 55024

Safety Precautions

This section presents important information intended to ensure safe
and effective use of this product. Please read this section carefully and
store it in an accessible location.
WARNING:
Shut down your equipment immediately if it produces smoke, a strange
odor, or unusual noise. Continued use may lead to fire. Immediately
unplug the equipment and contact your dealer or a Seiko Epson service
center for advice.
Never attempt to repair this product yourself. Improper repair work can
be dangerous.
Never disassemble or modify this product. Tampering with this product
may result in injury or fire.
Be sure to use the specified power source (EPSON AC Adapter. C,
Model number: M235A). Connection to an improper power source may
cause fire.
Do not allow foreign matter to fall into the equipment. Penetration by
foreign objects may lead to fire.
If water or other liquid spills into this equipment, unplug the power cord
immediately, and then contact your dealer or a Seiko Epson service
center for advice. Continued usage may lead to fire.
2 TM-T58 User's Manual
FCC/ICES-003 Class A
No.60950-1
IEC 61000-4-2
FCC Compliance Statement
For American Users
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the
user will be required to correct the interference at his
own expense.

For Canadian Users

This Class A digital apparatus complies with Canadian
ICES-003.
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11