Descargar Imprimir esta página

Koenic KVC 200 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
English
Safety instructions
• Only use this appliance for its intended use.
The appliance is not suitable for commercial
use. This appliance is only suitable for
indoor and household use.
• Before connecting the appliance to the
power supply, check that the power supply
voltage and current rating corresponds with
the power supply details shown on the
appliance rating label.
• Never use a damaged appliance!
Disconnect the appliance from the electrical
outlet and contact your supplier if it is
damaged.
• To avoid damaging to the power cord, do
not squeeze, bend or rub it on sharp edges.
Keep it away from hot surfaces and open
flames as well.
• Place the cord in such a way that no
unintentional pulling or tripping over it is
possible. Keep the appliance and its cord
out of reach of children.
• If an extension cord is used, its capacity
needs to be suitable for the power
consumed by the appliance.
• Do not operate the appliance with wet
hands or while standing on a wet floor. Do
not touch the power plug with wet hands.
• Do not open the appliance casing under any
circumstances. Do not insert any foreign
objects into the inside of the casing.
• Never use accessories which are not
recommended by the manufacturer. They
could present a safety risk to the user and
might damage the appliance. Only use
original parts and accessories.
• Keep the appliance away from any hot
surfaces and open flames. Protect the
appliance against heat and cold, dust, direct
sunlight, moisture, dripping and splashing
water.
• Do not wrap the power cord around the
appliance.
16
KVC 200_A5_130624 (1.4).indb 16
• Connect the power plug to an easily
reachable electrical outlet so that in case
of an emergency the appliance can be
unplugged immediately. Pull the power plug
out of the electrical outlet to completely
switch off the appliance. Use the power
plug as the disconnection device.
• For additional protection, we recommend
the use of a residual current device (RCD)
with a tripping current not exceeding 30mA
in the electrical circuit supplying power to
your appliance. The installation should be
done by an experienced electrician.
• Do not leave the appliance unattended, if it
is in use or the power plug is connected to
an electrical outlet.
• Remove any blockage of the hose or tubes
immediately before using the appliance
again.
• The hose should be checked regularly and
must not be used if damaged.
• Do not store or use the appliance close to
heat sources.
• Always carry the vacuum cleaner by the
handle, never by the suction hose or cord.
• Only use the accessories provided with the
appliance.
• Caution! Always unplug the appliance
before assembling, checking, changing or
removing accessories!
• Make sure the surface is completely dry,
otherwise the vacuum will be damaged.
After shampooing a carpet, allow the carpet
to dry completely before using the vacuum
cleaner.
• Prior to vacuuming, remove pointy, sharp
or large items to avoid damage of the
appliance.
• Never use the vacuum cleaner without the
filters in place!
• Static electricity: Caution - Use of the
appliance and telescopic tube can cause
static electricity.
24/6/13 3:22 PM

Publicidad

loading