Using The Timer; Maintenance - Panasonic RF-U350 Instrucciones De Funcionamiento

Using the timer

You can set the times at which to turn the power on and off and set the station and volume level while the power is on.
Preparation: Setting the clock. (
Select the broadcast station. (
Adjust the volume. (
1. Setting the timer times
Press and hold.
If this display appears ...
ADJUST CLOCK
Select the ON time.
Press.
Select the OFF time.
If this display appears ...
CHANGE OFF-TIMER
Press.
2. Setting the timer settings to ON
Press.
The unit must be off for the
timer to operate.
Note
• Once the timer times are set, they need not be set
the next time.
• To change the times, perform time setting procedure
again.
• The "[TIMER]" display flashes during a timer operation.

Maintenance

If the surfaces are dirty
6
6
page 5)
page 4)
page 4)
ON 0 : 00 OFF 0 : 00
Set the clock.
�
ON 18 : 00 OFF 0 : 00
ON18 : 00 OFF18 : 00
�
ON18 : 00 OFF20 : 00
The same time has been
set for both the ON time
and OFF time. Set the timer
times again.
�
ON18 : 00 OFF20 : 00
(Turn the unit off)
18 : 00
[ TIMER ]
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that came with the cloth
carefully.
Setting the timer settings to OFF
These steps can be taken while the power is on.
Press.
Setting the timer settings to ON
Press.
The unit must be off for the timer to operate.
If this display appears ...
ADJUST CLOCK
ADJUST TIMER
Note
Even when the timer settings are set to OFF, the timer
time settings remain in the memory so that when the
timer settings are next set to ON, the timer function will
be activated at the set times.
Checking the timer settings when
the power is off
Press and hold.
What has been set is now
displayed.
The illustrations show
RF-U350.
TIMER-PLAY OFF
�
ON18 : 00 OFF20 : 00
Set the clock.
Set the timer times.
�
ON18 : 00 OFF20 : 00
VOLUME 28