Features; Assembly; Operation - Ryobi P238 Manual Del Operador

PRODUCT SPECIFICATIONS
Coupler/Chuck .......................................................... 1/4 in.
SPEED/TORQUE
1 - LOW ............................................................................................................. 0 – 1,050 RPM/600 in.lb
2 - MEDIUM .................................................................................................... 0 – 2,200 RPM/1,300 in.lb
3 - HIGH..........................................................................................................0 – 3,200 RPM/2,200 in.lb
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance. In Mexico, please call 01-800-843-1111.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.

FEATURES

Impacts Per Minute ............................................. 4,000 IPM

ASSEMBLY

WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.

OPERATION

WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
 Driving long deck screws, driving carriage bolts into deck
posts; driving Tapcon
crete; driving screws into metal studs
VARIABLE SPEED SWITCH TRIGGER
See Figure 1, page 8.
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
5 — English
screws into block walls and con-
®