Fixing Outgoing Conductors; Fixing Conductors With Cable Terminal - M Type Bolt Clamp - WEG FSW 160 Manual De Instrucciones

3. FIXING OUTGOING CONDUCTORS

3.1. FIXING CONDUCTORS WITH CABLE TERMINAL - M TYPE BOLT
CLAMP
Take off the cover (acc. to chapter 1.3);
g„
Take off the shields for terminals (acc. to chapter 1.5);
g„
Fix the conductors according Figure 10;
g„
Fix the conductor with M5 screw and torque 3 Nm;
g„
The screw kit is compound by 12 M5 screw and 6 clips type S;
g„
Break down appropriate elements of the shield for terminals depending on the
g„„
thickness of a conductor (Figures 11-17);
Figure 11
Figure 14
Instruction manual for mounting and service of fuse switch disconnectors
Figure 10
Figure 12
Figure 15
Figure 17
www.weg.net
Figure 13
Figure 16
13