Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
www.weg.net
5.2. LOCKING AND UNLOCKING OF MEASURING POINTS
Take off the cover (acc. to chapter 1.3);
g„
Move a slider of the cover upwards in order to expose the measuring points (Figure 26);
g„
In order to lock measuring points move locking elements according to the arrow
g„ „ „
direction (Figure 28) until they get the moment of skipping in the moving of the cover
(Figure 30);
Figure 28
In order to unlock the measuring points move locking elements according to the arrow
g„ „ „
direction (Figure 29) until they get the moment of skipping in the moving of the cover
(Figure 30).
5.3. AUXILIARY CONTACT BLOCK
The assembly of auxiliary contact block in the fuse switch-disconnectors FSW 160 it will
be assembled manufacturers.
6. PROCEEDING WITH THE MATERIAL UTILIZED
FSW type fuse switch disconnectors are manufactured with the use of materials and
technology which are not harmful to the natural environment.
Obligatory regulations regarding protection of the environment should be respected.
The product utilized should be dismantled and metal parts should be apart from plastic
ones. Useless metal parts should be segregated to non - ferrous metals and others and
they are to be scraped. Plastic parts which can be recycled should be sent to recycling
company. Plastic parts which can not be recycled should be sent to utilization company.
Cardboard packaging and plastic bags which are recycled should be sent to recycling
companies. In case of any doubts please contactwith the manufacturer.
7. TRANSPORT AND STORAGE CONDITIONS
Storage should be performed in original packaging, in dry and clean rooms at
temperaturę higher than -5 °C and related humidity not higher than 80% at temperature
+35 °C. At the highest temperature +40 °C air humidity should not be higher than 50%.
16
Instruction manual for mounting and service of fuse switch disconnectors
Figure 29
Figure 30
Publicidad
Capítulos
Tabla de contenido
