For this surface, set the steam to level mini-
mum.
11.3 TAKING CARE OF PLANTS AND HUMI-
DIFYING ROOMS
To care for your house plants, remove the du-
st from the leaves using the steam. Use the
Portable Steam Cleaner with the flexible hose
attached to easily direct the jet (to attach it
see Chapter 3). Steam the surface at a mini-
mum distance of 50 cm, adjust the steam to
the minimum level.
Plants breathe better and will be cleaner and
brighter. Furthermore, you can also use the
steam to refresh spaces, especially those fre-
quented by smokers.
12. FRESCOVAPOR
WARNING: Never put FrescoVapor into the
water tank.
FrescoVapor is a air freshener that contains
natural substances. Designed to mix with
steam it releases a fresh perfume in every spa-
ce and, thanks to its special composition, it is
able to eliminate bad odours.
To use FrescoVapor, proceed as follows:
- Unscrew the deodorant dispenser cap loca-
ted on the floor brush and fill it with Fresco-
Vapor (20).
- Tighten the cap (20).
- To start dispensing the deodorant, press the
selector located on the brush to the "ON" po-
sition to release the deodorant. Press the se-
lector back to the "OFF" position to stop it
(21).
During dispensing of the deodorant, the sur-
faces may feel slightly damper, since Fre-
scoVapor mixes with the steam being di-
spensed. To stop dispensing FrescoVapor,
move the selector located on the brush to
the OFF position.
The selector only controls dispensing of the
deodorant that mixes with the steam. It does
not regulate the quantity of steam. To adjust
the quantity of steam, you must use the
steam-adjustment dial (12).
Contents of the FrescoVapor bottle: 200 ml
FrescoVapor is on sale at household applian-
ce stores, at Polti authorised service centres
or on the site www.polti.com.
WARNING:
- Keep out of the reach of children.
- IF SWALLOWED: Rinse mouth; do NOT in-
duce vomiting.
- Avoid contact with eyes, skin or clothing.
- Do not release into the environment.
WARNING: Before using FrescoVapor on
upholstery, leather, special fabrics and
wood surfaces, consult the manufacturer's
instructions and always carry out a test on a
hidden part or sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
13. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been used
up, steam will stop being released.
To restart operations just fill the water tank
again as described in the chapter 1.
WARNING: This operation must always be
done after having disconnected the applian-
ce from the mains.
14. REPLACEMENT OF THE LIME-
SCALE FILTER
Vaporetto SV420_DOUBLE has a filter con-
taining special resins capable of stopping the
limescale and extending the life of your pro-
duct.
We recommend that the filter be changed 3
times per year.
14.1 Unplug from the mains electricity.
14.2 Remove the water tank from the applian-
ce, pressing the upper button and pulling it
outward (1).
14.3 Gently lift the hook tab and remove the
old filter (22).
14.4 Position the new filter, push gently and
make sure that it is perfectly inserted (23),
then reposition the water tank.
The limescale filters are on sale at all leading
domestic-appliance retailers, at Authorised
Service Centres and online at www.polti.com.
| 28 |