Fixing Outgoing Conductors; Fixing Conductors With Cable Terminal- Bolt Clamp Ofm Type - WEG FSW 100 Manual De Instrucciones

3. FIXING OUTGOING CONDUCTORS

3.1. FIXING CONDUCTORS WITH CABLE TERMINAL- BOLT CLAMP OF
M TYPE
Take off the cover (acc. to chapter 1.3);
g
Take off the shield for terminals (acc. to chapter 1.5);
g
Fix the conductors with M5 bolt (Figure 12) with torque of 3 Nm or fix the conductors
g
according Figure 11 (M6 screw with torque of 3 Nm);
The screw kit is compound by 12 M5 screw and 6 clips type S;
g
Break down appropriate elements of the shield for terminals (Figure 13 (1 and 2));
g
Mount the shield for terminals (acc. to chapter 1.6);
g
Mount the cover (acc. to chapter 1.4).
g
Instruction manual for mounting and service of fuse switch disconnectors
Figure 11
Figure 13
1
www.weg.net
Figure 12
2
15