Sealing Of The Disconnector; Auxiliary Contact Block; Proceeding With The Material Utilized; Transport And Storage Conditions - WEG FSW 100 Manual De Instrucciones

www.weg.net

5.2. SEALING OF THE DISCONNECTOR

Seal by passing a string through sealing eye (Figure 28);
g
Seal should be tighten the closest to element being sealed (Figure 29).
g

6. AUXILIARY CONTACT BLOCK

The assembly of auxiliary contact block in the Fuse switch-disconnectors FSW 100 it will
be assembled manufacturers.

7. PROCEEDING WITH THE MATERIAL UTILIZED

FSW type fuse switch disconnectors are manufactured with the use of materials and
technology which are not harmful to the natural environment.
Obligatory regulations regarding protection of the environment should be respected.
The product utilized should be dismantled and metal parts should be apart from plastic
ones. Useless metal parts should be segregated to non- ferrous metals and others and
they are to be scraped. Plastic parts which can be recycled should be sent to recycling
company. Plastic parts which can not be recycled should be sent to utilization company.
Cardboard packaging and plastic bags which are recycled should be sent to recycling
companies. In case of any doubts please contact with the manufacturer.

8. TRANSPORT AND STORAGE CONDITIONS

Storage should be performed in original packaging, in dry and clean rooms at
temperature higher than -5
+35 C. At the highest temperature +40
o
18 Instruction manual for mounting and service of fuse switch disconnectors
Figure 28
C and related humidity not higher than 80% at temperature
o
C air humidity should not be higher than 50%.
o
Figure 29